How to install an Arlo doorbell

Arlo's Essential Video Doorbell is an expensive way to make your front door more secure, but it also gives you plenty of software features to help you identify strangers. This model is a great addition if you already have an Arlo home security system.

For those of you who have just purchased an Arlo Video Doorbell Camera, we have steps to show you how to properly assemble and install it. You can replace your existing doorbell with a wired setup or mount it wirelessly if you don't have an existing doorbell. We will cover both possibilities below.

Mounting and installation options between the two are similar, but we'll break them down separately. We'll start with the wired version. You must first install the power kit.

Arlo Video Doorbell Wired Installation

How to install the wired version of the Arlo Video Doorbell.

Step 1: Find your bell in the house. It is usually at the front door or in a hallway. Ring the bell and follow the sound to find the location of the bell.

Step 2: Turn off the power at the switch. Confirm that your doorbell and doorbell are not turned on by ringing the doorbell again. If there is no sound, the power is off.

Step 3: Remove the doorbell box cover.

Step 4: Connect the wires from the power kit to the terminals on the hood. Different homes have different hood configurations. Use the Arlo app for pc to determine where to connect the power kit cables. Make sure existing wires remain connected to terminals.

Step 5: Place the power kit in or around the hood. Use the Arlo app to determine the best locations to place your power kit.

Step 6: Replace the doorbell box cover and go to your doorbell.

Step 7: Remove your existing doorbell from the wall and unplug the wires.

Every home has a different way of doing this, so call an electrician if you're not sure. Tape the wires down and position them so they don't fall into the wall and get stuck or lost.

Step 8: Install the Arlo doorbell bracket in the doorbell area.

Use the contents of the box to install the holes in the correct places with the screwdriver. You can also use a drill, but you may have less control than a screwdriver. You can also use the mounting wedge to position the doorbell at a more optimal viewing angle.

Step 9: Remove the tape from the wires and connect the power and doorbell wires to the back of the Arlo doorbell. Wires can be attached to any screw.

Step 10: Fit the video door phone into the bracket with an upward movement.

Step 11: Reconnect power at the circuit breaker.

Check the LED on the Arlo doorbell. If the LED is off, wait a few minutes for it to turn on; if not, check your cables again. If the LED is amber, you may not be giving it enough power or the temperature is too low.

Step 12: Use the Arlo app to connect the Arlo Doorbell to your Wi-Fi network.

Step 13: Press the doorbell to sync with the app. Once synced, follow the app's instructions to complete the Arlo setup app.

wireless option

How to connect an Arlo wireless video doorbell.

Step 1: First, charge the battery that came with your Arlo doorbell.

Step 2: Connect your phone to your Wi-Fi network.

Step 3: Use the QR code on the Arlo box to connect the doorbell to your WiFi network.

Step 4: Find and mark the perfect spot for your Arlo Doorbell.

Step 5: Assemble your Arlo Doorbell using the contents of the box assembly, likely using a screwdriver or drill.

As you can see, both options are very easy to assemble, although the wireless method is a bit more secure and less permanent. The wireless option requires you to remove the battery to charge the doorbell every few months.

Once you've installed your Arlo Doorbell, go to the app and check them all out. Plus, connect it to your smart home ecosystem to integrate it throughout your home.

Arlo has a friendly return policy and warranty on their doorbells, so give them a call if you have any issues with the assembly process. The Arlo Essential Doorbell should hold up in any reasonable weather and temperature.